Zanussi ZDE47200W tripping out

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Zanussi ZDE47200W tripping out

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 24, 2016 at 5:02 pm #87408
    p.hxn
    Participant

    Hi,
    my Zanussi ZDE47200W keeps tripping out after about 20 minutes of use. The back vent is clean, as is the lint filter. I have tried using another socket on the same circuit with the same result. I tried to get an error code but stopped counting after 50 flashes of the red light! I have ran an extension from a socket on another circuit and it seems to work fine. The dryer has been ok for about three years on the circuit that trips out.
    Anyone have any ideas?
    Paul

    January 25, 2016 at 12:02 am #434764
    mundaysrepair
    Participant

    Re: Zanussi ZDE47200W tripping out

    Take the element cover off and look for evidence of moisture

    January 25, 2016 at 4:32 pm #434765
    p.hxn
    Participant

    Re: Zanussi ZDE47200W tripping out

    Hi, Mundaysrepair,
    Thanks for your response.
    I am away from home for a few days but will investigate what you suggest and post next week.
    Paul

    February 5, 2016 at 6:17 pm #434766
    p.hxn
    Participant

    Re: Zanussi ZDE47200W tripping out

    😕 Had a look, no moisture there!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.