Zanussi ZDT12011/FA. leak in base.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDT12011/FA. leak in base.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 2, 2017 at 5:27 pm #92290
    smeghead
    Participant

    PNC 911539107/02

    Been called to this twice for same fault- water in base.
    Had it running on different progs but can only find a small drip left on the overflow pipe.- Maybe overfilling ?
    This PNC & model doesn’t show on pressure mod kit, so am a bit stumped as to why it must be overfilling, Any ideas, going back again on Friday.
    Thanks
    Clive

    October 3, 2017 at 3:36 am #450831
    Simon46
    Participant

    Re: Zanussi ZDT12011/FA. leak in base.

    1st part on the list on qualtex is that dreaded pressure switch.

    October 3, 2017 at 8:20 am #450832
    Hollytree_Technical
    Participant

    Re: Zanussi ZDT12011/FA. leak in base.

    The model is listed on my copy of the pressure switch mod service bulletin (page 16, right hand column) so I would suggest that you fit the mod.

    Jem

    October 3, 2017 at 3:20 pm #450833
    smeghead
    Participant

    Re: Zanussi ZDT12011/FA. leak in base.

    OK, thanks. will order pressure kit & fit. ( & hope ! )

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.