Zanussi ZDT12011FA

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZDT12011FA

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 29, 2015 at 1:35 pm #85673
    AMS
    Participant

    PNC 91153910700

    Went to this dishwasher this morning and it appears to be overfilling and aborting with the programme end light flashing once about every 3 second . I see on Connections that the pressure switch is number 3 in the popular spares lis . Would it be fair to assume that this is a common failure? I see from a previous post that Seamy mentioned a mod kit for this problem. Would you care to elaborate please Seamy if you’re reading this?

    Cheers,

    Dave

    July 29, 2015 at 4:55 pm #429242
    bazza500
    Participant

    Re: Zanussi ZDT12011FA

    4055346060 is the mod kit you require.

    July 29, 2015 at 10:58 pm #429243
    AMS
    Participant

    Re: Zanussi ZDT12011FA

    Thanks Barry, but that number is not registering with Connect.

    July 30, 2015 at 9:52 am #429244
    AMS
    Participant

    Re: Zanussi ZDT12011FA

    Can you help on this one johnmac11?

    July 30, 2015 at 5:01 pm #429245
    bazza500
    Participant

    Re: Zanussi ZDT12011FA

    I could order you one if your stuck

    July 30, 2015 at 5:35 pm #429246
    AMS
    Participant

    Re: Zanussi ZDT12011FA

    What does the mod kit consist of? Would it be worthwhile just changing the pressure switch? I’ll bear you offer in mind though Barry.

    July 30, 2015 at 6:15 pm #429247
    bazza500
    Participant

    Re: Zanussi ZDT12011FA

    If you change the pressure switch it will only last weeks. The mod kit is fitting an air trap to the sump. Very easy and takes 10 mins at most.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.