Zanussi ZDT21006FA not heating

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi ZDT21006FA not heating

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 10, 2022 at 12:29 pm #101236
    Alan1968
    Participant

    Hi, the above dishwasher is around 3.5 years old. It will complete a full cycle but doesn’t heat up during washing or dry at the end. I have checked the heater coil (28 ohms) and replaced the temperature sensor with a new part but to no avail. Can anyone suggest further checks i can make.

    ZDT21006FA / PNC 911 539 205 00 / Serial No 82917240 / Type GHE623DA2 / 1950 W
    thanks

    Alan

    October 10, 2022 at 9:59 pm #483953
    electrofix
    Moderator

    chances are its the motor tacho

    look up part no 372205506

    its a beko part but it works ok, lux want you to buy a new motor

    Dave

    October 11, 2022 at 11:46 am #483954
    Alan1968
    Participant

    Hi Dave

    Thanks for the reply, where is the ‘ tacho coil ‘ located on the machine ?

    Thanks

    Alan

    October 11, 2022 at 12:05 pm #483955
    electrofix
    Moderator

    take right side off and its at the back end of the wash motor

    Dave

    October 11, 2022 at 12:25 pm #483956
    Alan1968
    Participant

    Thanks Dave, I will order the part and report back

    Thanks again

    Alan

    July 25, 2023 at 11:30 am #483957
    Googleit
    Participant

    Alan1968 wrote:Thanks Dave, I will order the part and report back

    Thanks again

    Alan

    did the new tacho sort the issue?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.