Zanussi ZJD 12191

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZJD 12191

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 13, 2009 at 8:55 am #50917
    mike100
    Participant

    Runs for about 3 mins then start pause light starts to flash.

    Interlock shows signs of brown and feels hot although it appears to be working ok

    Strange thing is it works ok on t/d cycle.

    Any ideas please

    Mike

    December 13, 2009 at 9:49 pm #306335
    aqualectric
    Participant

    Re: Zanussi ZJD 12191

    Recirc pump or heater to check first. You could run the diagnostics first to help pinpoint the problem….

    HTH,

    Steve.

    December 15, 2009 at 1:13 am #306336
    leavemetogetonwithit
    Participant

    Re: Zanussi ZJD 12191

    Drier element low insulation. Under the 40 Megohm. :rolls: Disconnect to see if machine then works. It’s quite usual for the dryer to continue to work in such circumstances ❗ . Change lock as well or it’ll blow the board when it goes next week.
    Mike.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.