Zanussi ZSF6161 not cleaning fully.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZSF6161 not cleaning fully.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2009 at 5:28 pm #43687
    FlyingBrick
    Participant

    Zanussi ZSF6161 not cleaning correctly.

    Had a phone call from a customer with a Zanussi ZSF 6161 that does not clean the dishes as well as it used to. She has used the cleaning tablets and checked the spray arms for blockages.
    States that the tablets do not seem to dissolve completely as they used to in the drawer.
    Dishes dry with lots of stains on them when the cycle finishes
    Any quick checks before I set sail to have a look that are common with this model chaps. Partially blocked filter, sump/pump impeller etc.


    Chris

    February 23, 2009 at 5:37 pm #278119
    helo_75
    Participant

    burnt relay on pcb?
    not heating!

    February 24, 2009 at 8:51 am #278120
    FlyingBrick
    Participant

    Re: Zanussi ZSF6161 not cleaning fully.

    Thanks helo_75

    Sounds about right with the pcb track burnt by the relay.
    Will be having a good look this afternoon to check water temp on the wash cycle.

    Chris

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.