Zanussi ZT605 d/washer not drying!

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Zanussi ZT605 d/washer not drying!

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #21009
    effzedarr
    Participant

    Hi this is something i’ve never come across before, customer says the pots etc are warm/hot after the drying cycle but the’re damp ,especially the cutlery. I first fitted a drain pump as this was noisey , so I suspected after a long wash prog the pump was playing up, now nice & quiet but still damp pots! The prod # is 911825033.
    Why is it always d/washers that give me grief 👿 ?
    cheers Chris… 8)

    #189152
    Penguin45
    Participant

    Re: Zanussi ZT605 d/washer not drying!

    Chris,
    You know that TDS disc wot you’ve just got? Check the last service bulletin listed for that pnc no……….
    Chris.

    #189153
    effzedarr
    Participant

    Re: Zanussi ZT605 d/washer not drying!

    Cheers for that but we have’nt got the new TDS disc yet & our old copy stopped working so any advice would be much appreciated about that drying fault! What did the service bulletin say Chris?
    cheers again Chris.. 8)

    #189154
    whitevanman
    Participant

    Re: Zanussi ZT605 d/washer not drying!

    effzedarr wrote:Hi this is something i’ve never come across before, customer says the pots etc are warm/hot after the drying cycle but the’re damp ,especially the cutlery. I first fitted a drain pump as this was noisey , so I suspected after a long wash prog the pump was playing up, now nice & quiet but still damp pots! The prod # is 911825033.
    Why is it always d/washers that give me grief 👿 ?
    cheers Chris… 8)

    Lack of rinse aid dispensed can sometime cause this problem, just a thought it may be the cause ???

    wayne

    #189155
    effzedarr
    Participant

    Re: Zanussi ZT605 d/washer not drying!

    Any idea if the service bulletin is on the new TDS disc ❓
    Chris.. 8)

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.