Zanussi ZWD 1262 W

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi ZWD 1262 W

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 16, 2017 at 2:05 am #92623
    KevinAshton
    Participant

    Recently my 10-year-old reliable Zanussi stopped washing. It would get about 2 minutes into the cycle and then stop. It can still drain and spin okay. I have cleaned the waste hose and the filter on the water intake hose. I also drained water out from the bottom of the machine and made sure there are no visible blockages.

    I’m not getting an Error code on the LED display.
    I’m sure whether it is fixable or whether to go and buy a new machine.
    Any advice or suggestions would be appreciated, thank you.

    November 16, 2017 at 7:31 am #451742
    Martin
    Participant

    Re: Zanussi ZWD 1262 W

    2 minutes into the cycle means it should now be heating up the water so check out that heater.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.