Zanussi ZWD 1472 S unusual washer dryer fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWD 1472 S unusual washer dryer fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 23, 2010 at 1:54 pm #57433
    Micky 32
    Participant

    E20 and sometimes E10 when the dryer is running. Machine is draining ok. It runs ok without clothes. Any ideas?

    September 23, 2010 at 3:13 pm #331072
    Madmac
    Participant

    Re: Zanussi ZWD 1472 S unusual washer dryer fault

    Condenser ducting blocked, NTC wires broken at ducting and intermittent open circ valve coil are the usual suspects on recent ‘lux washer dryers Micky.

    September 23, 2010 at 8:11 pm #331073
    bigchrisoioi
    Participant

    Re: Zanussi ZWD 1472 S unusual washer dryer fault

    e10 > open circuit coil on valve

    e20 > blocked condensor

    September 24, 2010 at 11:24 am #331074
    Micky 32
    Participant

    Re: Zanussi ZWD 1472 S unusual washer dryer fault

    Thanks for the info lads! Going back to it today and will post the outcome.

    September 25, 2010 at 11:48 am #331075
    Micky 32
    Participant

    Re: Zanussi ZWD 1472 S unusual washer dryer fault

    Went back to machine. There was a lot of fluff in the condensor. Cleaned out and all is working again 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.