Zanussi ZWD1227W (914604000)

[Toni]

Hi
This machine wont fill (Door locks)
Have checked the carbons, all ok
when I tipped the machine back it started filling
I disconnected the pressure switch hose when machine was set down again, but it wouldn’t fill again

Could it be the pressure switch ?

Regards
Toni

[Seamy]

Re: Zanussi ZWD1227W (914604000)

Have you checked the error codes in diagnostics?
Appliance won’t fill till it proves its empty, so start by checking the drain pump, filters, pressure chamber, pressure hose & pressure sw’, sump hose. On washer dryers especially pay attention that heating elements are’nt low reading to earth.

[Author]

Posts