zanussi zwf 1207w pr no 914216103(01)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf 1207w pr no 914216103(01)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 13, 2011 at 9:23 pm #63925
    knobs
    Participant

    Had a couple of these recently
    select prog press start,pump runs for much longer than normal,then stops.
    this happens on all progs ,had the board out all connectors off.checked water valves,press switch,motor.ideas ?

    July 13, 2011 at 9:41 pm #355546
    Criscold
    Participant

    Re: zanussi zwf 1207w pr no 914216103(01)

    Have you tried entering diagnostics on these ?

    July 13, 2011 at 10:05 pm #355547
    knobs
    Participant

    Re: zanussi zwf 1207w pr no 914216103(01)

    not sure how to

    July 13, 2011 at 11:05 pm #355548
    leavemetogetonwithit
    Participant

    Re: zanussi zwf 1207w pr no 914216103(01)

    Often caused by low insulation on one of the usual suspects.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.