Zanussi ZWF1431S showing E80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF1431S showing E80

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 29, 2008 at 5:19 pm #37038
    myfil
    Participant

    We have a Zanussi washer ZWF1431S (914 516 327) showing E80 on pgm startup. Am I right in thinking this code is often a blocked/broken recirc pump (altho I am not familiar with this particular Zan machine)?

    (Hopefully NOT the control module…)

    Regards to all

    May 29, 2008 at 5:34 pm #253251
    helo_75
    Participant

    E82: Error in reading the RESET/OFF position of the programme selector.
    E83: Error in reading the programme selector code

    May 29, 2008 at 7:13 pm #253252
    Flyman
    Participant

    Re: Zanussi ZWF1431S showing E80

    E84: sensing circuit on circulation pump triac faulty (Pcb)
    E85: Circulation pump faulty (Circ pump, wiring, Pcb)

    May 29, 2008 at 7:34 pm #253253
    helo_75
    Participant

    so, in short

    u need to go into diagnostics and get the exact code

    June 10, 2008 at 10:29 am #253254
    myfil
    Participant

    Re: Zanussi ZWF1431S showing E80

    It turned out the coil on the (Askoll magpump) Recirc Pump was open circuit. Replaced the pump and that sorted it – so I guess E80 on those machines shows an OC recirc pump.

    Cheers 😆

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.