- This topic has 2 replies, 2 voices, and was last updated 18 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Hi guys, Had a fault today which i’m sure i’ve had before but b1ggered if i can remember what the problem was, Anyway, Zanussi zwf1631w pnc 914521203/00..Dead display. When you switch on the appliance the door lock briefly activates but doesn’t lock and that it, no display just mains light is on? m/c does nothing. Any ideas. all normal checks ok, Meggared okay, loom etc all good. Pcb looks ok.
Cheers Pinky
Main PCB is dead… and in most cases is going also front (fascia) board too depending of faults caused…
Look closely to all triacs for any burning marks… if any of them is out then change part related (not only verify).
First you have to change main board and see if second board is good or not… All other machine parts are OK…
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.