zanussi zwf1632w washer wont move on to next step in program

[Seamy]

Re: zanussi zwf1632w washer wont move on to next step in pro

http://shop.aeg.co.uk/node13.aspx

Put the 9 digit appliance product code in here & do a search for motor part if you’ve established that its faulty & you need it. Not be too cheap though, listed at over £200. May be worth getting an engineer to double check.

[scoshep1]

Re: zanussi zwf1632w washer wont move on to next step in pro

Hi, just an update. I had my motor in to get tested today with a megger and it is OK.
Is there anything else that can give off the same fault code which was identified on this forum in previous posts. Any ideas greatly appreciated.

Cheers

[Specialist01269]

Re: zanussi zwf1632w washer wont move on to next step in pro

Hey Scott: Take a close look at the motor wiring harness to make sure that the insulation is’nt chafed through anywhere & shorting to the chassis.

[scoshep1]

Re: zanussi zwf1632w washer wont move on to next step in pro

Hi, motor wiring is good. I’m starting to think its the pcb but ive seen main boards and timers advertised. Mine only seems to have the power (front facia pcb) and another pcb. When i look at the pictures of the advertised timer and main pcb they both look like the one i have but the timer is about £30 cheaper.

I’m about to give up on finding the fault but i dont like to be beaten, any last advice. I cant change timer or main pcb to find out the problem still exists. My pcb is too new for my local place to run through a test software program. By the way they dont make/sell these machines anymore, wonder why…………..

Cheers

[Author]

Posts