Zanussi ZWF16581W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF16581W

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 6, 2012 at 4:42 pm #67756
    mjhservices
    Participant

    Zanussi ZWF16581W Washing Machine
    Anyone come across one of these machines that wont always spin almost as if it can not distribute the load and keeps trying, but its not the load because it will also happen empty?
    Sometimes after about 10 attempts it will finally spin but runs out of time before it can reach full speed.
    This is a brushless motor.

    February 7, 2012 at 12:33 am #368381
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF16581W

    Diagnostics?
    Mike.

    February 7, 2012 at 7:42 am #368382
    mjhservices
    Participant

    Re: Zanussi ZWF16581W

    Do you have the diagnostics?

    February 7, 2012 at 11:24 pm #368383
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWF16581W

    Nope. I thought it might be on mediator (Connect) but only a load of service bulletins for this model as far as I can see.
    I daresay a manual from a related model might serve, if you have the patience to look through the list.
    This model has an inverter board apparently. That board contains high voltage capacitors apparently…
    Could be worth a cautious look.
    Mike.

    February 8, 2012 at 7:39 am #368384
    mjhservices
    Participant

    Re: Zanussi ZWF16581W

    Thanks for your reply
    Mark

    February 8, 2012 at 8:15 am #368385
    eastlmark
    Moderator

    Re: Zanussi ZWF16581W

    service manual sent to your email address.

    February 8, 2012 at 2:50 pm #368386
    mjhservices
    Participant

    Re: Zanussi ZWF16581W

    Many thanks for your help.
    Mark

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.