Zanussi ZWF16581W cycle runs for 2 minutes and then resets

[stooby doo]

Hi,

can anyone help me with the problem I am having with my Zanussi ZWF16581W.
I ran it earlier today and when I went to check if it had finished, there was no power to it all. Turned out the fuse had blown in the plug and it must have been at the end of the spin cycle as the drum was empty of water and the clothes were not soaked. After changing the fuse no matter what program I choose, the machine starts and the timer starts to count down but after two minutes the timer reverts back to the full program time, the machine stops and the start button starts flashing again. No error codes are displayed and there are no bleeps.
I’ve checked the water inlet which is fine and there are no impeller blockages. I have also had the lid off and looked at the PCB and cannot see any obvious signs of a component burning out. I am by no means a washing machine technician but I am not a complete novice with electronics, electrics etc so have tools, multimeter etc. Any help would be appreciated.

[Author]

Posts