- This topic has 1 reply, 2 voices, and was last updated 10 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
customer claims the machine made a very loud thump then stopped leaving water in. tacho coil and magnet are ok. ive had the board out for connections obvious failed components. none found.
it lights up and start light is flashing but wont start.
it wont allow me to start a diagnostics.
insulation on heater is excellent.
am I looking at binning this cos it needs a board?
thanks
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.