Zanussi ZX99/55

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #49636
    clivejameson
    Participant

    Pord. 928 405 933

    This one just doesn’t run…the only function it does is switch the fridge light on when opening the door and sound the alarm when the freezer door is left open!

    Does anyone have the tech for this one please?

    Cheers

    #300521

    Re: Zanussi ZX99/55

    There’s a whole load of stuff on mediator. About a dozen PDFs. PM me if you can’t find it.
    Mike.

    #300522
    Penguin45
    Participant

    Re: Zanussi ZX99/55

    Sent you some stuff.

    Chris.

    #300523
    clivejameson
    Participant

    Re: Zanussi ZX99/55

    Cheers Chris…just what the doctor ordered!
    I returned on this one today assuming it was the bottom pcb and this proved correct. The only snag was the connector for the condenser fan motor decided to disassemble itself when i tried to unplug it 😕 Naturally the motor has two wires and it’s connector has three positions 😯 so after measuring +8v(dc) on one edge track and -8v(dc) on an adjacent one to establish the wire positions i managed to spend 20 minutes reassembling the tiny connector block.
    All plugged together, machine now running but no condenser fan!…20 mins completely redoing it’s connector block again before discovering the fan motor is open circuit anyway……
    Gotta love this job 😆

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.