Zanussi ZX99/55

[clivejameson]

Another one of these again icing up on the evaporator…in the past the top and bottom module and condensor fan motor have been replaced. Unfortunately this one refuses to go into service mode to give a fault indication.

The icing up problem has been intermittent occuring every couple of months or so but now seems to be constant so i’m beginning to think it’s a thermistor going out of range…anybody had this happen on these?

[cab]

Re: Zanussi ZX99/55

if it aint going into diagnostic, I would replace the pcb aswell, they do give problems

[clivejameson]

Re: Zanussi ZX99/55

Thanks cab, i replaced the bottom pcb two weeks ago and still the problem occurs….

[Author]

Posts