- This topic has 2 replies, 2 voices, and was last updated 14 years, 6 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
can anyone let me know procedure to extract wash pump on this one.sounds like drain impellor worn.paul
Re: zdt6252
Very simple job on this one, I normally lay the machine on the RH side – Remove plastic cover at bottom rear and then remove the metal plate that holds the motor in place along with the motor plug, You will find a plastic clip on the underside of the housing release and pull motor assy thru back
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.