zwd1262

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zwd1262

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 3, 2015 at 12:16 pm #85997
    dopper
    Participant

    no water going in from the valve for the dryer, valve is ok no power to valve so am thinking pcb? anyone advise and part number
    dop

    September 3, 2015 at 3:53 pm #429994
    Martin
    Participant

    zwd1262

    To quote you “am thinking” it could be that the lead to the condenser NTC could be broken? 😉

    Any further help needed I suggest you give us the machines full PNC number in order to look up whatever part you may need?

    September 4, 2015 at 8:15 am #429995
    dopper
    Participant

    Re: zwd1262

    checked the one at top cant remember if I checked the one at the bottom will have to take a look, 91460320400

    September 12, 2015 at 1:39 pm #429996
    dopper
    Participant

    Re: zwd1262

    ONE AT BOTTOM OK

    September 12, 2015 at 3:23 pm #429997
    Martin
    Participant

    Re: zwd1262

    dopper wrote:ONE AT BOTTOM OK

    Oh dear so maybe your suspicion about the PCB being at fault may have some standing. 🙁

    September 17, 2015 at 8:01 am #429998
    dopper
    Participant

    Re: zwd1262

    cheers

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.