zwf12070s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zwf12070s

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 22, 2011 at 8:48 pm #60431
    dave-m
    Participant

    http://www.ukwhitegoods.co.uk/modules.p … c&start=30


    Does anyone know if the gen in the above link will work to put the ZWF12070s into diagnostic mode.
    I removed an incredible amount of stuff from down in it (about 30 coins, necklaces, a ziplok bag, buttons, colour catcher sheets…the list goes on!!!)
    Anyway, it seems to have gone into safe mode as its constantly pumping, nothing else. I didn’t have my fault code book with me and am just now looking at it but I was hoping to find out if it will work on the ZWF before i go back.
    Does anyone know?

    Cheers

    d

    January 23, 2011 at 9:08 am #342116
    Martin
    Participant

    Re: zwf12070s

    dave-m wrote:Does anyone know?

    I’ve sent you an email which should help.:D

    January 23, 2011 at 10:07 am #342117
    dave-m
    Participant

    Re: zwf12070s

    That really will help Martin.

    Much appreciated.


    d

    January 23, 2011 at 8:08 pm #342118
    clockworkone
    Participant

    Re: zwf12070s

    had two of these in recent weeks.blown inlet valves.1 main wash and 1 pre wash.blown triac on board both times.diagnostics is only way with these.paul

    January 23, 2011 at 9:04 pm #342119
    dave-m
    Participant

    Re: zwf12070s

    cheers Paul

    D

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.