Forum Replies Created
-
Posts
-
Re: Hotpoint BFI620 Eco light Flashes Help!!
Hi Jim,
double checked the earth leakage all seems ok.
think i have ordered the wrong part my serial no is 502252632 and the part i ordered is c00143222
do you have any info.
iain
Re: Hotpoint BFI620 Eco light Flashes Help!!
thanks for your help once again ill double check everything tomorrow.
iain
Re: Hotpoint BFI620 Eco light Flashes Help!!
hi jim,
thanks for replying.
i have checked for earth faults using a digital meter against the metal casing it does not stay on infinity the meter does the same as if you touch the two leads together is this what should happen.
i got a timer/control board from partmaster and fitted it. when i switched it on the 4th (eco) light came on and stayed lit(no flashing) and would not budge no matter what button i pressed.
i checked the box to see if there was something i had missed but only found the card initialization instructions which i could not follow as it requires me to hold down the P button which is not working on the new timer/control board.
could the new board be faulty?
thanks
iain
Re: Hotpoint BFI620 Eco light Flashes Help!!
hi Jim,
Thanks for your help before really appreciate it.
just got over some money troubles and settled for doing the dishes myself for a while there.
Just had a wee look at the INDESIT there tested the earth from heating element and getting a closed circuit (hope im explaining this right meter goes from infinity to 000)
i also tested everything else i could find for resistance and earth have found no problems jumping out.
any clues????Re: Hotpoint BFI620 Eco light Flashes Help!!
Alright Jim,
Thanks for the advice yesterday I have tested the heating element for resistance and im getting 0.26 ohms when set at 2000ohms.
The power supply to the heating element was connected using a plug, so I disconnected and tested the terminals is this right?
If you could reply I would be very grateful.
Thanks
Iain
