[5archibalds]

Re: Beko AP930 have no idea where to put the part

Have fixed bought problems was hard getting into the ice censor switch had to remove all the fast chill compartment after taking clear cover off pushed the white back to slide out was quite hard then unscrewed the white box on white hand side one screw. this revealed censor switch. under the ice tray itself was a little oblong like box that unclipped to reveal the other end of censor. is fiddly job but manageable.
The ice despenser once got front cover off which again was hard as has a lot of clips we noticed that that a blue cable going to the motor was not attached so hopefully that problem solved also.
Hope this has helped anyone who has had similar problems.

Carol

[Author]

Posts