[AdamSmile]

Re: Beko AP930 No water supply to ice cube tray

johnsdad wrote:The reason the tube freezes is because the heater switch under the dispenser is in the off position

Thank you johnsdad. I checked this switch and it was not depressed. I wondered if the pipe would refreeze and how long it would take.

God only knows why Beko assume my kids won’t press any unidentified switch at any opportunity.

Thanks again
Adam
http://www.smilecomputersolutions.com

[AdamSmile]

Re: Beko AP930 No water supply to ice cube tray

I have managed to solve my own problem so I thought I would post my own answer so that other people can benefit.

The reason the tube on the back had popped off was because the tube inside the freezer was blocked with solid ice, so every time I reattached the tube on the back, it popped off again due to the water pressure building up against the blockage.

I squirted hot water into the tube with a syringe until it came through into the ice cube tray inside. I suppose defrosting the freezer would also work.

Hey presto, problem solved.

Thanks Adam, You’re welcome Adam.
http://www.smilecomputersolutions.com

[Author]

Posts