[AdamV]

Apologies for the very late reply. Its been a while since this has happened now, but the first fault (self pause) is happening again. I had taken the main PCB out of this one and reflowed the solder joints on the relays, simply because my last hotpoint had issues due to poor soldering. After doing this neither of the 2 faults I mentioned happened for about 3 months. Now fault 1) ( machine pausing itself) is happening again.

Regarding lights , there are NO changes to any of the lights on the display when this happens. Whatever program light was on before remains on, no others come on. The machine beeps once, and the “start” button flashes, just the same as if you had pressed “start” to pause it. Or, if the door was opened. This happens after the prewash, and when the machine has refilled and ejected the tablet. Sometimes the water has been heated, other times its just before the water has heated….If you press start the machine carries on completes the cycle just fine and with hot water. And sometimes it doesnt happen at all.

Should I be looking at the door catch sensor? Any other ideas what to check?

Thanks
Adam

[AdamV]

Sorry, It is WFE 2B19 UK , I have no idea why I wrote WFB several times when I knew it was WFE…

Here is a link to a pic of the model plate anyway, incase it has anything relevant: https://drive.google.com/file/d/1x2HDG–aBcVV3uD09tdKxu5SNVz9fUv6/view?usp=sharing I tried to upload but said the quota had no space.

Thanks
Adam

[Author]

Posts