[Adrianw69]

Re: Diplomat AD8132 Dishwasher pump problem

Thanks K, that was helpful but the conclusion sounds expensive.

I will email for controller/timer p & d after checking state of kids shoes.

Adrian

[Adrianw69]

Re: Diplomat AD8132 Dishwasher pump problem

I have been thinking about this problem. The machine cannot simply time water in and water out. There must be a water level switch that trips the valve to close and the pump to switch off. Can anyone please confirm this and indicate a suitable part.

I cannot believe that a timer / controller is at fault.

Thanks
Adrian

[Adrianw69]

Re: Diplomat AD8132 Dishwasher pump problem

Hi K

OK time take out a spanner.

Where can I get spares for this or are Diplomats “throw away”

Cheers

[Adrianw69]

Re: Diplomat AD8132 Dishwasher pump problem

I am guessing that the timer is solid state. If that is the case what other mech parts are involved?

Adrian

[Adrianw69]

Re: Diplomat AD8132 Dishwasher pump problem

Thanks for your reply

The machine pumps out at the end of the washing cycle, but throughout the drying cycle continues to pump. The pulsing sound I have decided is due to the pump being dry. Opening the door the indicator light is steady. This means that the cycle is complete. Close the door and the pump starts immediately followed by the beep beep. I think the pump will continue to run on until powered off.

Could it be due to a partially sticking aquastop float? If this is the first place to look where do I look next?

Adrian

[Author]

Posts