[Alz]

Re: Siemens SF24A262GB/15 complete failure

I have continuity, and the part looks to be in perfect condition, although my meter doesn’t measure capacitance.

The machine will not power on at all, so if works without this part, then I’m assuming that will probably be ok.

I also pulled the main power switch apart (wish I hadn’t, a pain to put back together!) some of the contacts had some soot on them, I cleaned them up, put it back together again, still no luck!

I appreciate the support guys, any other ideas?

[Alz]

Re: Siemens SF24A262GB/15 complete failure

Perfect, I’ve removed the part, I’ll try and get another one tommorow, is there any way to test the one I have?

[Alz]

Re: Siemens SF24A262GB/15 complete failure

Thanks for the swift reply,

Pardon my ignorance, but I’m not sure which part you are referring to, could you point it out from these drawings? I think it should be on page 4 or 5

https://portal.bsh-partner.com/service2(bD1lbg==)/doc_display_frame_master.htm?DocTitle=&DocPages=000&DocProduct=SF24A262GB{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}2f15&FormatFrom=&DocType=AET&HasPartList=X&HasAccessories=X&ListEntryIdentifier=SF24A262GB/15

Thanks again!

[Author]

Posts