Aqua1711

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 20, 2008 at 8:37 pm in reply to: Servis M6006 — NO SPIN??? #243736
    Aqua1711
    Participant

    Re: Servis M6006 — NO SPIN???

    I have measured a short circuit (0.6ohms) accross 2 terminals on a round black unit which is fitted into the back of the drum at the bottom.

    It made no difference if the drum was full or empty and it still pumped whether it was disconnected or connected.

    Is this any help?

    Thanks.

    February 20, 2008 at 7:29 pm in reply to: Servis M6006 — NO SPIN??? #243735
    Aqua1711
    Participant

    Re: Servis M6006 — NO SPIN???

    Hi, Where is the water level switch? If I can measure its continuity I will be able to let you know. Thanks

    February 20, 2008 at 6:00 pm in reply to: Servis M6006 — NO SPIN??? #243733
    Aqua1711
    Participant

    Re: Servis M6006 — NO SPIN???

    Sorry, Belt is tight and does not show any signs of slipping either.

    Thanks

    February 20, 2008 at 5:59 pm in reply to: Servis M6006 — NO SPIN??? #243732
    Aqua1711
    Participant

    Re: Servis M6006 — NO SPIN???

    Thanks for the reply.

    Across the two terminals there is approx 30 ohms.
    This metallic unit has an earth, 2 blacks (one to each of the heater terminals?) and 2 blues (from the Minisel module).

    Does that ohmage sound about right?

    Cheers, Aqua1711

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)