[aussiedean]

Re: Problem Miele Professional WS5425 MC 13

OK managed to work it all out, it appears some of the tracks on the circuit board have corroded possibly due to a leaking rubber hose on top of the machine a while back (Since replaced)

One of the relay’s has also welded at some point as well so looking for these parts currently. If anyone has a line on these parts could they let me know please.

Kind Regards

[aussiedean]

Re: Problem Miele Professional WS5425 MC 13

Oh fantastic that’s great thanks Dave.

Now not sure if this is the correct description but removing the sequence knob on the circuit board. ? Bit hard when I cant see the item but is there a knob of some sort that needs to be removed from the circuit board.

Also I will attach a picture of the parts list that they say is required which can’t be purchased in NZ.

Does anyone know where I might be able to get these parts mentioned in the attached pic please.

Can’t thank you enough for your assistance ….. cheers

[aussiedean]

Re: Problem Miele Professional WS5425 MC 13

Also if anyone is able to offer any assistance on how the front panel is to be removed please.

I’m not able to get to the machine but can pass on the instructions if possible please.

Even better would be a manual but I understand that is only for techs, so a bit of advice would be great.

Thanks in advance for your assistance.

[aussiedean]

Re: Problem Miele Professional WS5425 MC 13

Hi all just to confirm the model number is WS5426 MC 13

[aussiedean]

Re: Problem Miele Professional WS5425 MC 13

Thanks Dave appreciate your input. Will check the Thermistor and wires as suggested.

[Author]

Posts