Forum Replies Created
-
Posts
-
Re: ZWD1271W
Hi Martin,
Very many thanks. There is one on it’s way. I will let you know if it sorts it out.
Kindest regards
RebeccaRe: ZWD1271W
Hi Martin,
Yes I have checked the pump for the water in the drum and it is working as it should. My husband has taken the top off took the vacuum hoses off and blown down all of them no blockages in any. Water is free flowing and powerful into the 3way valve. He also took off all hoses from 3 way valve and blown down all of those as well 1 of them had a very slight bit of pressure we then ran a wash and bits of dirt was in it so then we put a washer cleaner through nothing has made any difference. My husband is thinking of changing one of the pressure switches but doesn’t know which one. If you know the electrical values of the pressure switches he can test them. Which switch would you suggest we change first? or do you think it could be something else?
Thank you for your help.
RebeccaRe: ZWD1271W
Hi,
It has always washed perfectly until recently when I noticed the laundry coming out feeling like it’s not been rinsed properly and it looks dingy and it never has before also with the same wash load in and on the same programme it’s not taking on the normal amount of water for that load. You never on any programme or cycle you can’t see any water on the glass. We have had the washer from new so know it should be taking on more than it is.
Thank you for your help.Re: ZWD1271W
Hi Martin,
The washing was coming out dingy, and not feeling rinsed properly. I watched it fill and it normally takes on some water then does a few turns and then filles some more. It isn’t filling as it should. I then started it with nothing in it to see how much water it was taking on and it doesn’t fill any more even when you put it on different settings including the rinse setting Thank you again for your help.
