[becsom]

Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog

gegsy – just wanted to say thankyou, thankyou, thankyou!!

New impeller jug part delivered for £16 all-in, fitted by my semi-capable hubbie, and we now have a fully working dishwasher 😀

This site is brill, your advice WAAAAYYYYY better than a £70 Bosch engineer call-out. Nice one 😉

[becsom]

Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog

Thanks gegsy

I’ve ordered the part, so fingers crossed it’ll do the job and the dishwasher will be workng again soon 😀

[becsom]

Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog

Ok – please forgive my ignorance of terminology, my knowledge is restricted to the diagrams and part names from the Bosch website ‘spares’ page diagrams.

Water matrix=water inlet (big plastic housing for water intake and distribution). Some ‘gunk’ in top right corner above a piece of curved black plastic. A possible culprit? Replacement part only £20+VAT but can’t work out how to free it from the water inlet cover on the inside of the dishwasher. Brute force???

Not sure what the metering unit is – the impeller jug???? Also taken this off and looked clear of debris. Worth replacng anyway?

Many thanks

[becsom]

Re: Bosch SGV43E03GB/16 fills then drains, won’t run a prog

Just taken the clear hose between water inlet and pump housing off (=sump outlet??) and is all clear. Any other ideas? Willing to try anything that doesn’t sound too tricky…….

[Author]

Posts