[bez1]

Re: AEG 16830 Screen dead, fuse ok, door lock ok

So I’m guessing by the lack of response that the advice is probably to bin it off and go and buy a Miele?

Bez

[bez1]

Re: AEG Lavamat 16830 Washer/Dryer DRYER PROBLEM

Sorry for the 3 year delay in updating this!

This was the classic deign fault on this machine- when the drum spins over time it fatigues and breaks the orange wires connecting a dryer sensor in the bottom hose.

I reconnected the wires and strengthened them by wrapping black insulation tape around
Also useful to give the clear plastic condenser a good wash out while you’ve got the back of the machine off!

Thanks for help Penguin45 – seems like the forums are full of answers to this particular problem.

[bez1]

Re: AEG Lavamat 16830 Washer/Dryer DRYER PROBLEM

Thanks Penguin, will update you.

cheers for the quick reply

[bez1]

Re: aeg lavamat 16830 E20 problem

Thanks for your help. You’ll be glad to know i’ve sorted it. It must have been fluff/gunge/blockage that you cant see/get to. My solution was to put some washing soda in the drum, pour a kettle of boiling water over it, wait 10 mins then put it on a hot wash. Has been fine since.

except…….now ive got a new problem, with the dryer – dryer stopping around 20 minutes into the drying cycle for no apparent reason, no error code.

[bez1]

Re: aeg lavamat 16830 E20 problem

right, ive changed the pump, and hose, cleared the condensor out and still getting E20 with the drum not draining fully.

very frustrated.

[Author]

Posts