[Bibble]

Re: Ariston Margherita 2000 – I also have a problem!

What a gem of a forum this is. I’d be grateful for any help, please. I’m not getting any flashing error codes but have the following problem with my AWD12 Advantage.

My query relates to just after I’ve put a load in and switched it on. I’m pretty sure that it used to let some water in via tray 1 (about 5 seconds worth) and then used to pump it out again (say for 10 seconds) presumably so there was no old water in the bottom from a previous cycle. Then it would draw water in thru tray 2 where the powder lives and start the washing cycle proper.

More recently it lets water in for 5 seconds (via tray 1) then only pumps out for just a second or two. Then proceeds with the normal cycle, with water going thru the tray 2.

Today I put a single item in to wash (cycle 2). It let the water in for 5 seconds (tray 1) then only pumped out for a second or 2 and started washing away without drawing any water/powder thru tray 2. 😕

This might also explain why small loads done on wool wash seem to emerge with powder still on them at the end of the cycle

My guess is that this is a problem with whatever measures the water level/load. Please can anyone advise?

Thanks

[Author]

Posts