[bilabonic]

Re: HELP – SMEG SE210X – Can not reset timer/use oven !!!!!

This is what i plan on shorting –

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

So i have to feed the spring over the outside of the seal to get it to the inside as it’s in one piece ?

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

I just don’t get at what point you put the spring on ? Are you on about feeding it over the seal from outside after it is fitted or fitted around the seal and fitting both at once.

Sorry to be a pain, advice is MUCH appreciated.

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

I can get the seal on BUT not the spring ??

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

How do i get the spring on though ? There is no join in it ??

What is the exact process, do i leave spring on the rubber whilst fitting that ? Or do i feed it on somehow after inner is fitted ??

Looks IMPOSSIBLE tbh, there is also a large rubber ‘tab’ on the inner bit, where does this go ?

Thanks

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

I have totally removed the seal now, how the heck do i get the inner part back on with the spring !!!!

Seems impossible without removing the drum !!!!

Cheers

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

Mine is one big spring on the inner, not removed the outer yet.

[bilabonic]

Re: HELP- Putting inner seal back on Hotpoint BWM129 ??

It is a spring on the inner drum.

So i need to remove the outer spring and fit inside first ?

[bilabonic]

Re: HELP-Can you replace bearings on hotpoint aquarius WMF 7

Cheers

[bilabonic]

Re: HELP-Can you replace bearings on hotpoint aquarius WMF 7

Hi

I can post a pic if that helps ?

What is a ‘sealed drum’ and how does this effect bearing replacement on washing machine ??

Thanks

[Author]

Posts