[billtweedy]

Re: John Lewis washing machine E10 error

Thanks for the explanation, I’ll check them out.

Thanks

Bill

[billtweedy]

Re: John Lewis washing machine E10 error

Martin wrote:The inlet valve faulty.

If that is the fault would it not happen on other fill cycles or could it be an intermittent fault.

Thanks

Bill

[billtweedy]

Re: John Lewis washing machine E10 error

Just an update – I managed to find the last error code reported by turning the program knob to the 2nd position and holding both the start button and the one to it’s left which gives an E11 code.

The tap is obviously on and the mains pressure is OK so is there anything else that could give me this problem?

Thanks

Bill

[billtweedy]

Re: John Lewis washing machine E10 error

Is there a chance that both filling and pumping can happen at the same time?

Thanks
Bill

[billtweedy]

Re: John Lewis washing machine E10 error

It’s not siphoning as far as I can tell, the water going into the drain seems to be pumped. The pump is generally very quiet.

It doesn’t always happen and when it does it is the last 4 minutes of it’s cycle.

Bill

[Author]

Posts