Birds

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Bosch WTA4408 – Not heating #169190
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Greg, the Davids and all,

    got the heater, fitted and now all working.

    Thanks to all that helped.

    Great web site.

    Paul

    in reply to: Bosch WTA4408 – Not heating #169186
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Greg,

    thanks for the price – nice one. This is better than Dave Conway quoted me which was £86 inc vat inc delivery (but thanks to dave for his help). So the first question is where can I get one at the price you quote?

    2nd – is replacement a reasonably straight forward job?

    Cheers

    in reply to: Bosch WTA4408 – Not heating #169181
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    yes done that and there is conductivity through the switch when checked with a meter.

    in reply to: Bosch WTA4408 – Not heating #169179
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Greg,

    found the reset button, however using an ohm meter the element (disconnected) does not give a reading – so I assume this has gone.

    I find this pretty poor for a 18mth old Bosch.

    Regards

    in reply to: Bosch WTA4408 – Not heating #169177
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Greg and Penguin45,

    thanks for your help and promt responses. I will attempt the reset and take the tips on board.

    Regards

    in reply to: Bosch WTA4408 – Not heating #169174
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Greg,

    This may have been the case initially – I do not know. My wife is the user.

    If this can cause the fault to start with then we will take heed.

    However now the heater is not working at all. It’s been out of order for a few days. The same as the original problem months ago.

    Thanks

    in reply to: Bosch WTA4408 – Not heating #169172
    Birds
    Participant

    Re: Bosch WTA4408 – Not heating

    Ok thanks for the response. The air flow is good (just very cold). I checked the hose and all looks ok. It is only about two metres long and vents out of a fanlight window.

    So the reset switch is behind the rear panel, yes?

    Thanks again.

Viewing 7 posts - 1 through 7 (of 7 total)