Forum Replies Created
-
Posts
-
Re: Zanussi WJD 1457 w washer/dryer
Thanks Dave I have now changed flty switch on the board with one of the switches we never use all working OK. Thanks once again for your help
Re: Zanussi WJD 1457 w washer/dryer
Thank you for your help. Yes the condenser was fully blocked and their was a wire of the temp probe. After a good clean out and reconnection of the wire the dryer worked fine. Unfortunately after using it a couple of times the reset/skip switch is not working, on investigation have found the switch on the cct board has broken offor. To my disappointment I’ve been told this part iso no obsolete so it looks like a new washer. So regards and thank you for your help and advice
Re: Zanussi WJD 1457 w washer/dryer
Will the blockage be around the condenser chamber or could it be the condenser itself. I’ve taken a couple of hoses of the chamber and taken the pump out they seem to be clear. Is their an easy way to get into the chamber. Thank you for all your help I appreciate it
Re: Zanussi WJD 1457 w washer/dryer
Checked for fluff all seems ok. Fills with water after 1min of dryer time
