[bomdas]

bomdas wrote:

nomadPaul wrote:
Most likely to be the carbon brushes in the motor if everything else seems ok.

Motor will need to be removed to check/replace –

Power off and plug out if you attempt this yourself

Hi, thanks. I’ll try that and get back to you.
B

Yes, that was it! Thank you. And thank you to everyone who posted elsewhere advice on how to proceed with this type of repair. In due course i’ll post how i went about the job. Well within the capability of any competent DIYer, -but remember to disconnect from the electric supply!

[bomdas]

Bosch 2004 with suspect brushes

nomadPaul wrote:Most likely to be the carbon brushes in the motor if everything else seems ok.

Motor will need to be removed to check/replace –

Power off and plug out if you attempt this yourself

Hi,
Have removed the brushes and there’s only about half an inch left, so i’ve ordered replacements, from off this site.
Many thanks, fingers corssed!
B

[bomdas]

nomadPaul wrote:Most likely to be the carbon brushes in the motor if everything else seems ok.

Motor will need to be removed to check/replace –

Power off and plug out if you attempt this yourself

Hi, thanks. I’ll try that and get back to you.
B

[Author]

Posts