[brookie1979]

Re: PLEASE HELP BEKO WM5100W Problem

i have opened the lid and had a look at the circuit board i didn’t see and dampness to it at all but just in case i used a hair drier on a gentle heat and went over the board just in case there was any dampness.Waited a few minutes and then turned it on the solid green light came on for about 5 seconds and then it started to flash brightly and then it dimmed until i could just see it flashing then it went a bright solid green for 5 seconds again and then repeated the cycle again and again flashing dimming then solid green again. can anyone tell me whats wrong with it or is the machine knackered???

[brookie1979]

Re: PLEASE HELP BEKO WM5100W Problem

i have tried several different sockets, changed the plug and even changed the mains wire but with no change to it i didn’t think to check the circuit board.

[brookie1979]

Re: PLEASE HELP BEKO WM5100W Problem

i cannot remember if the machine was tilted to the right when it was transported it could be a possibility. do u think i should take the lid off and check the circuit board and dry it if it needs it?

[Author]

Posts