[carmelkelly]

Re: New Ignis adl347 Fault

Hi kwatt

Thanks for the reply – sorry about confusion – changed post because I had more info & also thought people might think from post title that the machine was new when it is in fact approx 8 years old.

Re the beeps/flashing – there is no pattern that I can identify – there is a slight pause after each beep & it keeps beeping until I open the machine – similarly with the flashing light just keeps flashing. Is this likely to indicate F1 – NTC break? Do you know what the symptoms of this would be?

Many thanks

Carmel

[carmelkelly]

Ignis ADL347 Fault PLEASE HELP

This is an update to my previous post.

I turned the dishwasher off overnight and then turned it on again this morning to see if I could get a better idea of what is happening.

When I turned it on & set it to the Bio 50 degree wash it seemed to start as normal but then it stopped. After quite a time it seemed to start again & then stop. I checked inside and the machine was hot inside so I closed it again. I left it until I heard a continuous beeping sound which stopped when I opened the machine. The start light was flashing continuously and the washing mode had changed to the pre-wash setting. The dishwasher tablet was still in the cutlery basket unused & dishes were still dirty.

Can somebody please help me find out what the problem is?

Many thanks

Carmel Kelly

[carmelkelly]

Re: Crusader Tumble Dryer PEASE PLEASE HELP!!!

Thank you so much for getting back to me – that is very helpful.

[Author]

Posts