[chmielar]

Re: Servis Grande problem

Penguin45,

Thanks for your response.

The model number is M3810. I’m not entirely sure how to check the motor the at pcb. Can you advice what pins to measure across.

Just to confirm, there is no drum action at all but the rest (pumping, heating) seem to be fine.

Regards,
Chmielar

Penguin45 wrote:Model number would be a good start…….. M—-

The electronics are always the weak spot with Servis appliances, the pcb will fall over if you smile at it incorrectly. Assuming that you have continuity through the motor when measured through the loom at the pcb end, there isn’t anything else to fail. I take it that there is no drum action at all?

Penguin45.

[Author]

Posts