[clf1605]

Re: Hotpoint Aqualtis AQGMD149 – F5 Machine is Blocked

Thanks Steve – I reattached the wire (with the power switched off!) but no response from the pump.

Also this afternoon, took off the sump hose and drain hose, unbelievably finding no foreign objects in either, and re-checked the filter – no debris anywhere in the system. Plus when I manually drain the machine it has no problem ejecting water all over the floor via the hose! So I simply don’t believe it can be blocked.

Washtronics, hmm not sure if I ran the full 15 minute cycle or just started a program, paused and then asked it to pump out.

BTW Anyone know where the pressure switch is and how you reset it?

At one point this afternoon the error message changed to F11, but now it’s back at F5 – no idea why.

[clf1605]

Re: Hotpoint Aqualtis AQGMD149 – F5 Machine is Blocked

Hi Martin
You don’t happen to have a wiring diagram do you – the loose wire seems to be coming from the pump, not going to it! (ie one end of the wire is wired into the pump, the other end is free)
Thx
C

[clf1605]

Re: Hotpoint Aqualtis AQGMD149 – F5 Machine is Blocked

Yes it is – took the u-bend off and could pass a pen through the tube without a problem…pump doesn’t even try to kick in, just silence.
thx

[Author]

Posts