[clough99]

Re: Electra wd1100a – Spin failing

Turned out to be the module 🙁

Fortunatly it was just one soldered joint gone that I could repair. 😀

I’m not sure what the component is but it was raised off the main curcit board with longer ( 15mm ) heat insulated wires. After testing the spin I noted that the component was hot to touch so I guess it had heat affected the soldered joint over the years

[clough99]

Re: Electra wd1100a – Spin failing

Thanks for the quick reply there – we very rarley do hot washes so it is something i will check tonight.

[Author]

Posts