[corfuit]

Re: Smeg DWF410SS – Drain pump cycle cuts out throughout was

Thanks for the reply eastlmark.

I must have a shower solenoid somewhere in the van, will give that a go – Do you think that would be ok as opposed to a washing machine solenoid?

As I say, I used my mains tester on the wires feeding the solenoid (with the solenoid disconnected) and the machine live to kind of act as a load and see if that made the pcb work but no luck there.

(If I disconnect say the drain motor and liven up machine, the PCB doesn’t light up until I put my mains tester across the wires, so obviously in this respect it needs a load to go through to join the wires – something new to me!)

Thanks for the help, will give it a go. Can’t really think what else it could be if not apart from PCB.

Thanks again.

[corfuit]

Re: Smeg DWF410SS – Drain pump cycle cuts out throughout was

Oh, heres a link to a similar scenario

viewtopic.php?f=33&t=34499

[Author]

Posts