[cousins]

Re: Hotpoint Aquarius Washer Dryer WD62

New switch fitted – one very happy wife and some nice clean clothes….

Just for the record – I was able to access the switch simply by removing the appliance top and a long arm down to its location. There is then enough wire length to bring it out to the top of the machine and work at it from there. This alleviated the need to tamper with the drum seal at all.

Many, many thanks for all your help with this problem.

Big Al

[cousins]

Re: Hotpoint Aquarius Washer Dryer WD62

Well done for your very prompt service. Yes I made a little diagram of wire colours – I bet some people forget to do that.
Have a good day…
Big Al

[cousins]

Re: Hotpoint Aquarius Washer Dryer WD62

Excellant – I’ve got the switch unit out. I have tried a circuit test across the C and L terminals and can get no circuit with the slider moved over (the action that would be caused by the door being closed). This I guess is the proof that it is in need of replacement…

(Out of pure curiosity there is a third terminal marked N which is shown by the diagram on the switch unit with a zig-zag line to the L terminal – my gut instict says neutral but this doesn’t seem to make immediate sense… I am just curious and a bit dense….)
Thanks so far.
(We really must get out into the sun soon)
Big Al

[cousins]

Re: Hotpoint Aquarius Washer Dryer WD62

Thanks for the prompt reply. You say to access it through the front. This baffles me a bit. How do I gain access through the front – I realise it is just to the side of the rubber seal; do you mean that I remove the seal and work through there?
Cheers
Big Al

[Author]

Posts