[cshannon]

Re: Hotpoint Ultima 1200 wd71

HI,

just to let you know, i got at the element, it is showing as an open circuit. Need to get one ordered now.

Wife is very impressed with screws and panels all over the kitchen floor !! 😯

Thanks again for your help.

Colin

[cshannon]

Re: Hotpoint Ultima 1200 wd71

It would be wouldn’t !! Thanks again, much appreciated.

Colin

[cshannon]

Re: Hotpoint Ultima 1200 wd71

Thanks again for your help, I’ll have a look at the element. One last question, is the element accesable from the back or is it an in the front jobby?

Thanks very much for help again, it is very much appreciated.

Cheers Colin

[cshannon]

Re: Hotpoint Ultima 1200 wd71

Thanks again for your reply. Ok so the most obvius thing for me to check is the element i would have thought. I guess a simple continuity check and a check for a short would show up, if i check the resistance of it, any ideas what i should expect to see?

Thanks again

Colin

[cshannon]

Re: Hotpoint Ultima 1200 wd71

Hi, thanks for replying. I initially thought about the element as the water is not heating up, but if that was the case, would the machine not stop as it had not reached the correct temrature?

Thanks

[Author]

Posts