Forum Replies Created
-
AuthorPosts
-
October 13, 2015 at 4:28 pm in reply to: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine #430816
DanielDeronda
ParticipantRe: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine
All sorted now, there was a blockage missed by the company who installed the machine, so that was removed & I got a new u-bend. The washing machine finished the 30min cycle without clothes & there are no more leaks from the sink. Happy days!!
October 12, 2015 at 10:00 pm in reply to: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine #430815DanielDeronda
ParticipantRe: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine
I’ve had a look at all the pumps linking the washing machine & have removed all gunk from them & cleaned them thoroughly. However, I’ve still got the OE code. My washing machine is in a small kitchen, & under some cupboards, so is difficult for me to get out on my own. I think I’ll have to call an engineer in, as I’m at the end of things I can look at. Is there anything more you can think of?
October 7, 2015 at 7:08 pm in reply to: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine #430814DanielDeronda
ParticipantRe: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine
Thanks Steve, I’ve gone into the sink area & removed the waste pipe & there does seem to be quite a lot of debris that I’ll try & remove & clean up. This may be the cause of the error code. Will reply again when finished & run a rinse/spin cycle.
October 7, 2015 at 5:35 pm in reply to: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine #430812DanielDeronda
ParticipantRe: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine
I’ve removed the filter & looked inside where it was fixed & put in a small screwdriver & fiddled about inside & there was nothing I could see that may have caused a blockage.
What next?
October 7, 2015 at 3:47 pm in reply to: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine #430810DanielDeronda
ParticipantRe: OE Error Code For My New Lg F12B8Qda 7Kg Washing Machine
All the water has been drained manually & I’ve removed the filter & cleaned it thoroughly & also looked inside the filter for any erroneous items causing the problem. I’ve not been able to find anything that looks could cause a problem like a coin etc.
What’s next that I can do before calling an engineer?
-
AuthorPosts
