Forum Replies Created
-
Posts
-
Re: Washing Machine IWME126 Error Codes
I knew because I had removed the filter and drained excess water and mopped it up. I could also tell by the way the clothes where tumbling about inside that they were dry.
It doesn’t matter now any way because I solved the problem last night! 😀
I took the machine out, took the top panel off and had a look at the door lock. After trying to free it from inside with no luck, I gave the door a good thump from the outside and pulled the door handle at the same time. This released the catch and allowed me to get the clothes out. This was also the cause of the error lights because I then put it on a wash cycle and it completed it no problem.
Just shows you, you can’t take the error codes too literally…
Thanks again for the help I got on here though, much appreciated.
Re: Washing Machine IWME126 Error Codes
Thank you for your help so far, much appreciated.
To give you a further explanation of the machines current behaviour. It was on a normal cycle and got to the spin cycle no problem, it’s when it finished the spin cycle the problem occurs. It sounds like its trying to click into another function but doesn’t and instead the door lock red light flashes and the green No.4 light flashes. The door is currently locked with washing in it but there is no water in the drum. Any further ideas? Also is there a way to over ride the door lock to get the washing out? I’ve tried switching it off and removing the plug etc but that doesn’t work.
Re: Washing Machine IWME126 Error Codes
Is there any chance it could be something else less costly? Or is it likely that this is the only problem it could be?
Re: Washing Machine IWME126 Error Codes
Thanks for confirming.
I have a colleague who can fix it, so how much are the spares going to cost?
Re: Washing Machine IWME126 Error Codes
I have attached a picture of the error lights I’m getting. According to the manual the green LED is the rinse symbol.
Cheers
