Forum Replies Created
-
Posts
-
Re: Indesit DI450 Lights 2 and 4
I removed all the filters and started the machine. It gave the error right at the start of the cycle as you predicted.
How do I go about checking the flow sensor or pressure switch. There doesn’t seem to be a diagram of where all the parts go in my manual.
Re: Indesit DI450 Lights 2 and 4
Yes I’d read in some of the posts trying to find a solution that the made in china models are not the best! I can only say I’m not guilty as it was in the house when we moved in.
After having another look at it yesterday it seems the place where the filter fits onto the filter handle is slightly worn and a bit loose. I mean where you turn it to lock the two pieces together. Do you think this might be enough to cause the issue?
Re: Indesit DI450 Lights 2 and 4
Thanks for your help. I had checked back before but looked in the wrong place and not noticed someone had replied.
I have found the panel on the door and it says it is a DI 450 UK C with a type number LS08-EVO3C. It is made in china.
When I looked at the filters before I found that the spinning filter was slightly broken, which I have now fixed. But this has not fixed the intermittent problem.
thanks again in advance for any help
